For new laser equipment, it is best to control the laser output power below 80%, mainly because the new laser tube is filled with gas. During high-power processing, it is easy to cause excessive gas consumption and reduce the life of the laser tube. After 5 hours of continuous work, take a break. laser equipment manufacturer，The main reason for working again for about 10 minutes is that the long-term operation of the laser tube will cause the temperature of the laser tube to rise, making its power unstable and weakened.
Circulating water maintenance rules: Circulating water is mainly used for the heat dissipation of the laser tube, which directly affects the power and service life of the laser tube. The circulating water must use pure water, so that the laser tube wall is not easy to scale, and the circulating water must be replaced when the water becomes turbid. The optimal water injection volume is 3/2 of the water tank. If it is less than 3/1, water must be added, otherwise the laser tube will break.
like：
